Tel: 01803 813803 / 01752 600066 - Monday to Friday 7.30 a.m-5.00 p.m, Saturday 8.00 a.m-12.30 p.m

Loglap cladding

Loglap cladding


Quality redwood timber & Tanalith treatment
Our tanalised Loglap cladding profiles are machined from quality redwood. The boards are machined with a lap or tongue & groove joints to allow adjoining boards to interlock but still allow some movement which may occur when timber responds to different moisture levels. After machining the boards are pressure treated with new generation Tanalith-E preservative.

This treatment helps protect the timber against decay and fungal attack and provides an increased service life to untreated timber or boards treated with a standard dip treatment. All cross-cut tanalised timbers should be treated twice with Ensele end grain treatment to maintain the timbers resistance to moisture. Our Loglap manufacturers use of redwood timber and next generation Tanalith E means these products are covered by a 15 year Manufacturers warranty see the bottom of this page for more details

Tanalised Loglap section sizes and lengths
At Southern Timber we normally stock two sizes of Loglap, ex. 38 x 100m and ex. 50 x 150mm. The smaller Loglap has a finished thickness of approx. 33mm and a cover of approx. 79mm. With the ex 150mm Loglap the finished thickness is 44mm and the cover is approx. 125mm. Board length availability is variable; we normally keep pack lengths of 3.6 metres and 4.8 metres but at times only 3.9 metres and 5.1 metre lengths are available. Where required and with a reasonable lead time we can get specific lengths, or different profiles, machined but the minimum order is normally 600-700 linear metres and lead-time of 4-8 weeks.

Profiles and profile images

    Keeping it looking good
    Our tanalised Loglap boards are commonly used to clad summerhouses, timber extensions, garden offices and log cabins. All of our pressure treated timbers will normally weather to a silvery-grey finish because of the UV rays of natural sunlight.

    Colours can be maintained and enhanced where required by using Osmo Country Colour, Osmo Natural Oil Woodstain or Treatex exterior oils. If the timber has gone grey the timber appearance can be rejuvenated with Osmo or Liberon wood cleaners.

    Manufacturers 15 Year Warranty
    Full terms and conditions for this Manufacturers Warranty are available on request - you will need to comply with these in full in order to take advantage of any warranty offered by the Manufacturer. Southern Timber is not a party to any warranty offered by the Manufacturer, so cannot accept any liability.


Order now on 01803 813 803
Call Us
E Commerce Site for Southern Timber
Enviromental Policy

Home | Products | Support | About us | Contact us

© Copyright - Southern Timber 2008-2014 | Website developed by Pixa