Low-slip deck oil
- Improves slip resistance on timber
- Rated as ‘low-slip’ product
- Sold in 2.5 litre tins
- Apply 3 coats for optimum effect
- One 2.5l tin covers 10-12 sq. metres
- Reapply when surface starts wearing
- Also protects timber against UV & mould
Phone to order
Lines open 7:30 - 17:00 Mon - Fri
Rustins Textured Decking Oil includes ingredients to improve the slip resistance in wet and dry conditions on exterior timber decking and timber walkways. This Rustins Decking Oil is independently tested and rated as ‘low slip potential’ according to BS7976, Part 2, 2002 assessment of slip resistance. It also contains UV inhibitors and biocides to protect the oil from mould and will allow the natural beauty of the wood to show through. Available in 2.5 litre tins
Textured deck oil can be applied over existing Rustins deck oils and can also be used over existing oil based finishes but test for compatibility a small area first. Timber must be clean, smooth, dry, and free of dust and contaminants. Do not apply to damp timber as this will prevent the oil from penetrating the timber and adhering causing it to flake off.
Coverage is approximately 12 – 14 square metres per litre per 1 coat, To achieve the low slip potential of BS7976 three coats must be applied, so a 2.5 litre tin should cover an area of approximately 10-11.7 square metres. Ensure the product is well stirred before use. Apply liberally with a clean brush allowing 4-8 hours between coats. Do not apply if rain is expected.
Periodic re-oiling should be carried out as required. When applying to previously oiled wood the surface should be cleaned thoroughly and be free from contaminants. Any flaking or peeling edges need to removed to provide uniform join between the old and new oils.
Clean brushes with white spirit or Rustin’s Brush Cleaner whilst still wet. Hard brushes can be cleaned with Rustin’s Brush Restorer. Tins of oil can be stored for many years if stored in original, tightly closed container in cool, dry place.