- 41mm x 41mm square spindles
- Choice of 900mm or 1100mm lengths
- Matching handrail & baserail stocked
- Space with short lengths of 41mm fillet
- Balustrade brackets also available
- Long lengths of ex. 38mm spindling
Phone to order
Lines open 7:30 - 17:00 Mon - Fri
Balustrade installations normally use the moulded redwood hand and base rail which are rebated for 41mm spindles to put the finishing touches to your deck. All the balustrading is tanalised with a smooth planed finish.
Softwood spindles are available as straight in 0.9m and 1.1 metre lengths. Fillet is available to ensure correct and consistent spacing between spindles, this should not be more than 100mm. Please note that any deck edges raised 600mm, or higher, than the ground should use 1.1 metre spindles to comply with building regulations.
An alternative spindle installation can be made using Southern Timber’s extensive range of planed timbers. Long lengths of spindling, usually 3.6 metre are stocked in ex 38mm x 38mm (32mm finish size) and 50mm x 50mm (44mm finish size) which can be cut to length and used in an American style balustrade. With 38mm spindling this would normally use 47mm x 100mm tanalised timber for handrail and baserail; with ex-50mm “spindling” it is more normal to use bigger sections such as the 38mm x 125mm smooth PAR deckboards.