- Unfinished 22mm oak flooring
- 6mm European Oak wear layer
- European manufactured flooring
- Boards T&G on all 4 sides
- Pack sizes 1.584 sq metres for 180mm
- Mix of boards from 2.2m down to 700mm
- Wessex unfinished to Special order
Phone to order
Lines open 7:30 - 17:00 Mon - Fri
Quality European Oak engineered floorboards
Our Wessex oak floor boards are a quality engineered product, manufactured with European oak and machined in Europe. All our Wessex boards are FSC sourced, they are engineered to minimise movement in testing situations – for example, kitchens, utility rooms, rooms with under-floor heating and conservatories.
Wessex engineered floorboard specification
Each Wessex engineered oak board is a single strip 180mm wide and end-matched, i.e. tongue & grooved on all four sides, to minimise wastage. These boards are machined in Europe with a generous 6mm oak wear layer and are laminated to a top quality 14mm birch ply. The boards are 20mm thick and can be used across timber joists as a structural floor without any sub-floor. The boards are carefully machined with micro-bevelled edges around both the long and short board edges.
Board pack sizes
Each pack of 1.584 square metres contains two boards at a full 2.2 metres, 2 boards at 1.1 metres, plus a 700mm and a 1500mm board to make up the pack. When ordering your floor and calculating your requirements please allow at least 10% for wastage and remember to place your order in square meters not the number of packs!
Your oak floor boards should be stored on-site to condition before laying, all wet trades work must have finished and all surfaces dried out. After fitting the Wessex will provide an attractive and hardwearing floor but to finish the installation these unfinished boards require a durable finish. We recommend using a quality Hardwax-Oil hybrid such as Osmo Polyx or Treatex Hardwax. As with all types of floor surface some care needs to be taken with chairs, table legs etc. to minimise the scratching of the floor.
Delivery of flooring from stock
You can packs of Wessex engineered floorboards from our Ipplepen Yard in Devon. Alternatively we can normally deliver locally to your home or site within 24-48 hours (except weekends). If you are traveling a long distance to collect your floor then please phone in and verify stock levels before making your journey. This is a kerbside delivery so there will need to be an able-bodied person be on site to put the flooring under cover and sign for the delivery.
Delivery of flooring Special Orders
Our Wessex Suppliers indicate a 3-5 day lead time on this unfinished oak flooring. It can be ordered for collection from our Devon yard, or we can arrange delivery to your home in the mainland UK. Depending on the quantity ordered there may be a delivery charge.
The hauliers are used to delivery to Trade sites and will need access for a delivery lorry, please advise of any possible access restrictions. This is a kerbside delivery so there will need to be an able-bodied person be on site to put the flooring under cover and sign for the delivery.