Field Gate Features
- Made from tanalised softwood
- Stock sizes 10’ and 12’
- Bespoke sizes made to order
- Sawn timbers used in construction
- Top rail 75mm to minimise flexing
- Gate posts and furniture stocked
Phone to order
Lines open 7:30 - 17:00 Mon - Fri
Heavy duty construction
These field or farm gates are made with sawn timber, they are intended for heavier duty applications than our diamond braced and turned heel. Our 3’ and 4’ gates normal have one diagonal brace from top to bottom rail, 5’ gates and above have more bracing. The hanging stile is machined from 5” x 3” sawn timber, the latching stile is made from 3” x 3” sawn and the top rail is morticed & tenoned into the vertical stiles.
Left hand or right hand hanging?
Our driveway gates are normally made as left-hanging, but can be made as right hanging to order. To work out whether you need left hand, or right-hand hanging gates visualise standing outside the property looking inwards – whichever post the gate will be hinged (or hung) on dictates if it is left or right hand. Please advise when ordering gates if they are being hung as a pair (that would need 1 left and 1 right) or whether they are being hung independently of one another.
Stocked sizes and bespoke gates
Diamond braced field gates are normally stocked in sizes from 3' gates primarily for pedestrian use, up to 12’ gates more suitable for vehicle use. They are stocked in 1’ increments but bespoke sizes can be made to order, to the nearest inch, up to a maximum size of 15’. Pricing is simple, an 11’ 4” gate would be charged at the same rate as a 12’ gate
Posts and gate furniture
We carry a range of suitable softwood wooden posts and a comprehensive range of gate furniture. Minimum sized wooden posts would normally be 125mm x 125mm for 3’ and 4’ gates, 150mm posts for 5’ to 7’ gates and 175mm or 200mm gates for 8’ to 12’. Gate hanging sets are offered in 300mm, 450mm and 600m sizes from stock.