38 x 150mm Sawn

25 & 38mm Carcassing

Timber details

  • Large stocks available
  • Pressure treated timber
  • Variety of timber section sizes
  • Choice of lengths available
  • Eligible for next day delivery

Phone to order

01803 813 803

Lines open 7:30 - 17:00 Mon - Fri

Product Details

38mm Stocks are home grown
Demand for 38mm timbers has decreased, because new buildings are specified with a minimum of 47mm for joists and studwork. Baltic and Scandinavian mills generally do not cut structural timbers, so most 38mm timber carcassing is home (UK) grown. There is however still demand from agricultural and domestic applications for 38mm timbers when 22mm timber isn’t suitable.

Regularised and graded timber
At Southern Timber we keep 38mm thick sawn timber in three widths 150mm, 200mm and 225mm (approx. 6", 8" & 9"). Because most timber is now being regularised these boards actually finish at 36mm width, they have a rustic appearance but are smoother than previous stock.

The 38mm tanalised boards provide a useful decking board where customers want a more 'rustic' appearance than provided by planed boards with their elaborate profiles. The boards are often utilised as ridge boards in pitched roof constructions, they can also be used for cladding the sides of a larger timber shed where any movement in the board width can be tolerated.

These timbers are not treated, or intended, for use in ground contact, but treated for where the timber may be subjected to the risk of wetting from rain. If however the boards are used in ground contact such as a raised vegetable or flower bed then make sure that water can drain away from the bottom of the raised bed, this will help to increase the board’s service life. As with all tanalised timber the service life of the board can be increased by the application of a water stain or repellent such as Osmo Natural Woodstain.

Timbers all pressure treated with preservative
These timbers are all pressure treated with Tanalith E, or similar, timber preservative. It is vital that any cross cuts are treated with two coats of Ensele end-grain preservative treatment.

38mm Timber stocks
Normally 2-3 packs of each section size are kept in stock.
 

Delivery details

Eligible for next day delivery

We offer next day delivery, when required, for our normal delivery days (Monday to Friday) and areas. Customers are requested to phone in before 12.00pm on the day prior to delivery with their complete product listing, delivery address and payment details.