Douglas Fir

Large Sections

Douglas Fir

  • Normal log lengths 3.6m, 4.8m & 7.4m
  • Typical section width up to 300mm
  • Home grown Douglas Fir
  • Supply as untreated or tanalised
  • Fine sawn finish 

Phone to order

01803 813 803

Lines open 7:30 - 17:00 Mon - Fri

Product Details

We can supply large sections of Douglas fir, larch and green oak machined for bespoke buildings. These are cut to size depending on what logs are available at the mill, generally log lengths are 3.6m, 4.8m and a maximum of 7.4 metres. 

Section sizes will depend on log availability, maximum widths tend to be between 250mm and 350mm. Most timber is fine sawn but some finishing will be required by the customer. Where required these timbers can be pressure treated with Tanalith E.

Douglas Fir is an attractive timber and can be cut into large beams, purlins and posts. The fresh cut timber is almost pink when freshly cut but tones down to light brown, or grey when exposed outdoors. Heartwood douglas fir sections can be cut but are more expensive. Douglas is very versatile and can be used structurally (grades up to maximum C18), and for cladding, fencing and landscaping applications.

Delivery details

Usually within 14-28 days

Delivery is largely dependent on seasonality, the mills are normally very busy from March to November. We are normally able to advise of approximate lead times when your order is placed. All special orders have to be paid for in advance.