Larch - Homegrown

Large Sections

Larch Features

  • Normal log lengths 3.6m, 4.8m & 7.4m
  • Typical section width up to 300mm
  • Home grown larch, grade to C24
  • Supply as untreated or tanalised
  • Fine sawn finish 

Phone to order

01803 813 803

Lines open 7:30 - 17:00 Mon - Fri

Product Details

We can supply large sections of larch, douglas fir and green oak machined timbers for bespoke building construction. These are cut to size depending on the customer’s specification, normally the mills work with log lengths of 3.6m, 4.8m and a maximum of 7.4 metres. 

Section sizes will depend on log availability, maximum widths tend to be between 250mm and 350mm. Most timber is fine sawn but some finishing will be required by the customer. Where required these timbers can be pressure treated with Tanalith E.

Larch is an attractive timber and very similar in appearance to Douglas Fir when fresh cut from the log.  European larch can be cut into large beams, purlins and posts and can grade up to a maximum of C24.  Our larch is normally sourced from Devon, Cornwall or Wiltshire.

Delivery details

Usually within 14-28 days

Delivery is largely dependent on seasonality, the mills are normally very busy from March to November. We are normally able to advise of approximate lead times when your order is placed. All special orders have to be paid for in advance.