£2,329.99 including VAT
- 12mm Shiplap cladding
- Double doors, lock and key
- 12mm Tongue and groove floor
- Solid board roof
- 12 Styrene glazed side windows
- 2 front Styrene glazed windows
- High eaves for extra headroom
- Uses 29 x 35mm & 29 x 45mm framing
- Dipped honey-brown finish
- Mineral roofing felt
Out of stock
Rowlinsons Timber Workshop 9×18
This Rowlinsons Workshop 9’ x 18’ is one of five workshops from Rowlinson Garden Products. These modular workshops vary in size, providing storage and work space and all should enjoy considerable natural light through their generous provision of windows. You could also consider the Workshop 9’ x 15’
Firstly the wall sections are clad with 12mm finished shiplap. Constructed with a solid boarded roof, the workshop floor is made of tongue and groove boards. Double doors are secured with lock and key (included) and both doors are fitted with three hinges.
These are sectional buildings, using 29mm x 35mm and 29mm x 45mm framing which becomes more rigid when the sections are secured to one another. The building is supplied with mineral felt for the apex pitched roof. The workshops feature higher eaves than large Rowlinson sheds so as to provide extra headroom. Finally, this workshop features twelve Styrene glazed side and two front windows.
Finally, please note this Workshop is supplied with a dipped finish, therefore the timbers must be protected by applying a quality wood preservative.
9 x 18 Workshop Dimensions
External Height: 2350mm, Width: 2880mm, Depth: 5590mm
Internal Height Max: 2210mm, Internal Height Min:1800mm
Internal Width: 2700mm, Depth: 5470mm
Door Opening Height: 1723mm, Width 1628mm
Footprint Width: 2700mm; Depth: 5470mm
Ideal base width: 2750mm; Depth: 5520mm
Delivery and Workshop Installation
All Rowlinsons garden buildings are delivered to kerbside and in flat pack format for customer assembly. Consequently each product is supplied with detailed Assembly Instructions. They can also be downloadable from this page in PDF format.
Adequate provision must be made to avoid ground contact and ensure air can circulate underneath the building. Placing the building on a concrete pad or slab base is acceptable provided that the building is not allowed to sit in pooled water during wet conditions. If the building is to sit on soil or grass it MUST be erected on pressure treated wooden 50mm x 50mm or similar bearers (These are not supplied in the kit). Rowlinson Garden Products recommend using pressure treated bearers with all buildings on any type of base
All Rowlinson’s Garden Products are supplied direct from their Cheshire Warehouse. Therefore no Workshops are available for collection from our Devon premises.
While most parts of Mainland UK are eligible for free delivery a few remote areas will have to pay a delivery surcharge. Please see Delivery details for Post Codes affected.
Phone to order
Lines open 7:30 - 17:00 Mon - Fri