Firstly, our tanalised 25mm Loglap cladding profiles are machined from quality Scandinavian redwood. The boards are machined with a lap or tongue and groove joints to allow adjoining boards to interlock. The T&G joint still allows some movement which may occur with variable moisture levels. After machining the boards are pressure treated with the new generation Tanalith-E preservative.
Tanalith next generation and 15 year Warranty
This Tanalith treatment helps protect the timber against decay and fungal attack. Therefore the service life is greater than untreated timber or standard preservative dipped treatment. All cross-cut tanalised timbers should be treated twice with Ensele. This is an end grain treatment and Ensele is formulated to maintain the timbers resistance to moisture. Our Loglap manufacturers use redwood timber. Combined with next generation Tanalith E means they can offer a 15 year Manufacturers warranty with this product.
125 TGV Log Lap cladding sizes
We supply three different profiles of Loglap, this one is mid range and therefore is our preferred board to stock. Nominally ex. 25mm x 125mm the finished thickness is approximately 20mm with a 110mm cover. Also available to special order are ex. 38 x 100 loglap and ex. 50 x 150 loglap. Finally this product provides a log effect at a very reasonable price.
Uses for loglap cladding
Our tanalised Loglap cladding boards are commonly used to clad summerhouses, timber extensions, garden offices and log cabins. All of our pressure treated timbers will normally weather to a silvery-grey finish. This is because of the UV rays of natural sunlight. Colours can therefore be maintained and enhanced by using finishes with pigment. We stock Osmo Country Colour, Osmo Natural Oil Woodstain and Treatex exterior oils.
Phone to order
Lines open 7:30 - 17:00 Mon - Fri