Feather Edge Panels

  • Four standard panel sizes
  • Standard stocked product
  • Made with UK grown slats
  • Tanalised  for longevity
  • Can be made to size if required
  • No integral gravel board

Product Details

Featheredge or Feather Edge Panels

Feather Edge Panels or Featheredge Panels, these taper sawn boards do the job. The featheredge fence panel combines the privacy, strength and attractive appearance of featheredge fencing with the convenience of a ready made panel. While they should be called feather edge panels we also sometimes call them closeboard  panels.  Please note that due to circumstances beyond our control we had to change panel suppliers in early 2019.  Our new style panels are similar to the earlier panels, the main difference being that they utilise 125mm boards.

Panel Construction

Firstly, each panel has a sturdy frame using 32mm x 50mm pressure treated timber. This helps to minimise flex and to hold the feather edge slats securely in place. Feather edge slats are 125mm wide, so with a typical 25mm lap only 100mm of each slat is visible.  These panels are made by the same suppliers as our HD lap Panels in the forest of Dean.  because they are manufactured under factory conditions we should be able to keep a better control on stock levels than previously.  We also stock 6×3 feather edge gates from the same supplier.

The featheredge fence panel slats are topped with a planed cap to minimise water ingress and to provide an attractive finish to the top of the panels. The panels can be fixed by screwing the frame to posts or by using a combination of 46mm and 52mm panel clips.

 

Stocked feather Edge Panels Dimensions

These feather edge panels are available in the sizes listed below. Please note that the panel heights do not include the flat bottomed capping which is fixed on top of the panel.

3′ Panels available 1.83 metre wide x 0.91 metre high (6’ wide x 3’ high)
4′ Panels available 1.83 metre wide x 1.22 metre high (6’ wide x 4’high)
5′ Panels available 1.83 metre wide x 1.52 metre high (6’ wide x 5’ high)
6′ panels available 1.83 metre wide x 1.83 metre high (6’ wide x 6’ high)

Other size feather edge (closeboard) panels can be made to order, approximate lead time 5-10 working days.  Please specify whether you would require 125mm or 150mm featheredge slats in the bespoke panels.

 


Phone to order

01803 813 803

Lines open 7:30 - 17:00 Mon - Fri

Delivery details

Usually within 1-2 days

At Southern Timber we offer a kerbside delivery through the Torbay, Teignbridge, Exeter, South Hams and Plymouth areas. While most deliveries are free sometimes they may be chargeable depending on location and the total value of the order.

We offer next day delivery, when required, for our normal delivery days (Monday to Friday) and areas. Customers are requested to phone in before 12.00pm on the day prior to delivery with their complete product listing, delivery address and payment details.