The Omega lattice top panels panel range has been our top-selling fencing option since it was introduced in 2010. The Omega lattice top panels are very decorative but are durable combining a sturdy design specification, quality materials and pressure treated timbers.
Panel Design and Manufacture
Horizontal slats are machined to a smooth finish and then arranged either side of the vertical battens to produce a sturdy privacy panel which helps to reduce wind load by allowing some air to pass through the structure. These quality fence panels are finished with a channelled frame around all panel and lattice edges.
Panel Size Options
All of these fencing panels are pressure treated with a light green preservative which mellows in colour when exposed to daylight. The panels can be supported with either 75mm (3”) or 100mm (4”) posts when installing. We carry sawn, planed and 15 year warranty post options in stock along with quick-setting Postcrete. Other associated products include 46mm Panel Clips, Gates, Stainless Steel Screws, Osmo Natural Woodstains and Planed Gravel Boards.
1.8m wide x 0.9m high (6ft x 3ft) Omega Lattice Top Panel (FSC Mix) (OLT90)
1.8m wide x 1.2m high (6ft x 4ft) Omega Lattice Top Panel (FSC Mix) (OLT120)
1.8m wide x 1.5m high (6ft x 5ft) Omega Lattice Top Panel (FSC Mix) (OLT150)
1.8m wide x 1.8m high (6ft x 6ft) Omega Lattice Top Panel (FSC Mix) (OLT180)
Panel Heights, a little note
The four panel sizes, 900mm, 1200mm, 1500mm and 1800mm refer to the approximate vertical height at the centre of each panel. Because of the gentle curvature of the panel design the height at the panel edges is slightly lower. So a 900mm height panel has a “shoulder” height of approximately 700mm, the 1200mm has a shoulder height of 1000mm – if you allow for a difference of 200mm between panel centre and panel shoulders then you should be pretty much there.
Phone to order
Lines open 7:30 - 17:00 Mon - Fri