- Anti-slip, aka ‘low-slip’ composite deckboards
- Choice of four deckboard styles
- Range of colours for most deckboards
- Higher anti-slip ratings than timber
- Complementary composite fascia & edging
- Durafix stainless steel decking screws
- Optional Plas-Pro joists & posts
- Pedestals & joist cradles for flat roofs
Key Distributor for Millboard in the South West
At Southern Timber we are proud to have been appointed in 2016 as the Key Distributor for Millboard in the South West. We have taken the most popular Millboard composite decking products into stock and anything from their extensive range is normally available within 3-7 working days. These Millboard products are explained in more detail on the website, this overview is intended to provide brief details on some of these product offerings
Choose your Millboard style
Millboard has developed a choice of three deckboard styles: Enhanced Grain; Weathered and Tactile. Enhanced Grain boards are moulded from smooth wooden board; available in a choice of five colours these boards are popular in contemporary applications. Millboard Weathered boards are available in Driftwood & Vintage shades; they are more traditional and rustic looking. Carbonised boards are a newer innovation, reflecting the Japanese technique where the surface of timber is burnt to produce a traditional styled timber board. All Millboard decking have excellent anti-slip credentials, but LastaGrip is the best of the best when a low-slip board is the most important criteria. Finally, we understand that the Tactile range is gradually being phased out but Millboard will still manufacture these boards to order, lead time estimated at 4-6 weeks.
Millboard decking colours
There are a total of 8 colours available; the colour options are as follows. Millboard Enhanced Grain in Coppered Oak, Golden Oak, Jarrah, Limed Oak and Smoked Oak. Millboard Weathered in Driftwood and Vintage. Millboard Carbonised in Charred and Embered. Finally Millboard LastaGrip is available n Coppered Oak and Golden Oak. For concealing any exposed cut board ends there is also a range of touch up coatings as well.
All Millboard deckboards feature a top layer of Lastane which provides a very high Anti-Slip surface and also helps to conceal the Durafix stainless steel fixings. For slip resistance these decking ranges have been tested in accordance with: BS79.76 Pendulum Friction Test and the results can be seen in the Product Specification downloads available on this page.
Millboard range of fixtures & fittings
Co-ordinated Millboard fascia and edgings are available for all 8 colours of deck boarding. The fascia boards are 16mm thick and come in 3.2 metre lengths. All edgings are 33mm x 50mm, the standard square and standard bulnose edgings are accompanied by a flexible bulnose edging. Standard edgings are 3.2 metres long, the flexible edgings are supplied in 2.4 metre lengths. All deckboards and trims can be secured with Millboard’s Durafix stainless screw fixings, these Torx head screws are lubricated and require no pre-drilling and when fixed correctly are almost hidden by the Lastane coating layer.
Phone to order
Lines open 7:30 - 17:00 Mon - Fri