Wessex UV Oiled

  • European oak engineered flooring
  • 6mm Oak Wear layer on 14mm birch ply
  • Wessex 180mm widths in stock
  • Pack sizes 1.584 sq metres for 180mm
  • Boards T&G on all 4 sides
  • Mix of boards from 2.2m down to 700mm
  • UV Oiled finish boards
  • Unfinished and lacquered to order
  • Other widths also to Special order

Product Details

Quality Oak engineered flooring

These Wessex oak boards represent a high quality engineered product, manufactured with FSC sourced European oak and machined in Europe. Wessex engineered flooring is designed to minimise movement in difficult situations, e.g. rooms with under-floor heating and conservatories.

Wessex engineered floorboard specification

Using European oak each single strip board is 180mm wide (other widths available to order) and is end-matched, i.e. tongue & grooved on all four sides, to minimise wastage. These boards are machined in Europe with a generous 6mm oak wear layer and are laminated to a top quality 14mm birch ply. The boards are 20mm thick and they are carefully machined with micro-bevelled edges around the long and short board edges.  We maintain brushed & oiled boards in stock, usually along with some unfinished stock.  Available to order are Cathedral, lacquered, Toffee and prime unfinished boards.

Board pack sizes

Each pack of 1.584 square metres contains two boards at a full 2.2 metres, 2 boards at 1.1 metres, plus a 700mm and a 1500mm board to make up the pack. When ordering your floor and calculating your requirements please allow at least 10% for wastage and remember to place your order in square meters not the number of packs!

Floor Maintenance

Your oak floor boards should be stored on-site to condition before laying, all wet trades work must have finished and all surfaces dried out. After fitting we normally recommend the floor is finished with one more coat of Treatex or Osmo hard wax oil to provide an attractive and hardwearing floor, but as with all floors care must be taken with chairs, table legs etc. to minimise the scratching of the floor.

Sizes normally available from stock

180mm width, pack size 1.584 sq. metres

Delivery of flooring from stock

You can normally collect your Wessex oiled oak floorboards from our Ipplepen Yard, or we can deliver locally to your home or site within 24-48 hours (except weekends). If you are travelling a long distance it is always wise to phone in and verify stock levels before making your journey. This is a kerbside delivery so there will need to be an able-bodied person be on site to put the flooring under cover and sign for the delivery.

Sizes available to Special Order

120mm width, pack size 1.056 sq. metres
140mm width, pack size 1.232 sq. metres
160mm width, pack size 1.408 sq. metres
200mm width, pack size 1.76 sq. metres
220mm width, pack size 1.936 sq. metres
240mm width, pack size 2.112 sq. metres

Delivery of flooring Special Orders

Our Wessex Suppliers indicate a 3-5 day lead time on these special order product sizes for delivery to your home in the mainland UK. The hauliers are used to delivery to Trade sites and will need access for a delivery lorry, please advise of any possible access restrictions. This is a kerbside delivery so there will need to be an able-bodied person be on site to put the flooring under cover and sign for the delivery.

Phone to order

01803 813 803

Lines open 7:30 - 17:00 Mon - Fri

Delivery details

Usually within 1-2 working days

We offer next day delivery, when required, for our normal delivery days (Monday to Friday) and areas. Customers are requested to phone in before 12.00pm on the day prior to delivery with their complete product listing, delivery address and payment details.