Square top TGV gates
An attractive but robust privacy gate, the Highgrove square top TGV gates are made to a high standard and their planed finish complements our range of decorative panels. Wherever possible all materials used are selected from our normal high quality fencing range. (Please note these are pedestrian, not driveway gates) We also stock matching TGV fence panels
Firstly these TGV (tongue and V groove) clad gates are ledged and braced using pressure treated 47mm x 100mm structurally graded timber. Two extra horizontals are included in the framing to give more options for the hanging of the gate. The TGV slats are ex 19mm x 125mm planed redwood. Therefore these gates represent a more secure option than our decorative gates. The square topped gates are finished with flat bottomed capping along the top of the framing.
Gate sizes and options
Our normal gate sizes stocked are 1.8m high x 0.9m wide (approx. 6’ x 3’). We discontinued the 1.2m high x 0.9m wide (approx. 4’ x 3’); and 0.9m high x 0.9m wide (approx. 3’ x 3’) gates in early 2019. However, bespoke sized gates can be made to order, lead time is normally 5-7 working days. We also offer a round top gate with a shallow curved top , these are our Deangrove gates.
Fixtures and Fittings
A variety of tanalised posts are stocked, we recommend 100mm x 100mm posts as a minimum size. These TGV gates are heavy and deserve a substantial post for support. Wherever possible our gate furniture is HD (Hot Dip) Galvanised. Hot Dip galvanised products are more suited to outdoor conditions than the lower priced BZP products. Finally, a comprehensive range of hinges, bolts and gate latches is held in stock. We also carry a cold galvanising spray where customers require their gate furniture to look as uniform as possible.
Phone to order
Lines open 7:30 - 17:00 Mon - Fri