Pitch Pine flooring
Our Pitch Pine boards are imported already kiln dried and machined with a surface that can be fine sanded and treated according to individual preference. Pitch pine was widely used in Victorian buildings and valued for its distinctive grain, rich colours and durability. After laying the colours will become even warmer. This flooring is very popular for period properties and for barn conversions where bigger boards have been specified.
Pitch Pine board length and width
The boards are supplied tongue and grooved on all four sides (end matched) and are normally stocked in wide boards, stocks are normally 177mm board width. It appears that 225mm boards will be few and far between in future, we will check if requested. The individual boards are nested into packs of three. Each nest contains one full length board and two ‘made to length’ end-matched boards which when laid interlock to provide the same length as the full length boards. Wherever possible we source boards in the 3.3m to 3.6m range lengths to provide reasonable working lengths for laying. All widths are 20mm thick.
Machining and finishing
The boards are kiln-dried at source down to 7%-9% moisture content but to minimise movement it is still recommended that the boards are stored on-site for at least 14 days prior to laying. Although we have no matching pitch pine skirting or architrave many of our customers have chosen primed mdf that they have paint finished in contrasting colours.
Because of the relatively high value of pitch pine we do send reasonable quantities through Palletline haulage. Typical costs are £45 plus VAT per linear metre – i.e. if the boards are 3.6 metres long you would pay 4 x £45 = £190 plus VAT for haulage,. The site must have mechanical offload or a minimum of 2 able bodied persons to offload the delivery. Access would also be needed for a lorry which may be up to 36 tonnes in weight
Phone to order
Lines open 7:30 - 17:00 Mon - Fri