£72.00 including VAT

    • Multi purpose adhesive for artificial grass

 

    • Two part polyurethane adhesive

 

    • Requires thorough mixing

 

    • 10kg tub sufficient for 15-25 metres

 

    • Available in 5kg or 10kg tubs

 

Product Details

Namgrass Artificial Grass Adhesive is a Multi Purpose Adhesive for joining artificial grass.  The adhesive is a two component polyurethane based adhesive system primarily designed for bonding artificial grass carpets.

Artificial Grass Adhesive, preparation

Namgrass adhesive should be mixed thoroughly with the Hardener Additive at a ratio of 10:1 by weight. Firstly add the hardener component to the adhesive component in the plastic tub. Mixing in all cases should be carried out thoroughly by using a mechanical stirrer. A mains drill and mixing paddle should suffice to ensure mixing of the two components is complete.

Before use, individual substrates should be evaluated for bonding performance prior to any large-scale application. Please note that the mixed adhesive should never be applied onto wet substrates because this will affect the curing process and lead to inferior bonding. Despite this reservation the adhesive is tolerant to use in damp weather conditions

Applying the adhesive

The mixed adhesive should be is poured from the tub directly down the centre of the tape. The adhesive is then spread by notched trowel  across a width of 250 mm, leaving a 25 mm strip uncoated at each edge of the tape. Using the notched trowel this allows the adhesive to stand up in ridges. This adhesive is suitable for bonding all synthetic grass carpets to geo-textile tapes.

It is important that sufficient adhesive is applied to transfer onto the carpet back. When this is pressed into position it should effectively fill the gaps between the stitches. Therefore coverage can be down to 15 m per set on some types of the very long pile carpet. The seam can be lightly rolled after making the joint and subsequently re-rolled when the adhesive is setting to a high viscosity mastic appearance. This normally takes 1 – 2 hours.

Another method commonly used is to hold the seams in place by weighting the carpet with dry sand or planks until the adhesive has cured. The adhesive will normally partially cure in 1 – 2 hours at average spring and autumn temperatures

Available in 5kg or 10kg tubs


Phone to order

01803 813 803

Lines open 7:30 - 17:00 Mon - Fri

Delivery details

Usually within 1-2 working days

At Southern Timber we offer a kerbside delivery through the Torbay, Teignbridge, Exeter, South Hams and Plymouth areas. While most deliveries are free sometimes they may be chargeable depending on location and the total value of the order.

We offer next day delivery, when required, for our normal delivery days (Monday to Friday) and areas. Customers are requested to phone in before 12.00pm on the day prior to delivery with their complete product listing, delivery address and payment details.

We can also offer Courier Delivery on this product throughout Mainland UK, delivery normally 24-48 hours.