36mm Stocks are home grown
Demand for 38mm timbers has decreased, because new buildings are specified with a minimum of 47mm for joists and studwork. Baltic and Scandinavian mills generally cut structural timbers, so most 38mm carcassing is UK grown timber. There is however still demand from agricultural and domestic applications for this thickness of timber. Because most timber is now being regularised please note these boards actually finish at 36mm thickness.
Regularised and graded timber
At Southern Timber we keep 36mm thick sawn timber in three widths 150mm, 200mm and 225mm (approx. 6″, 8″ & 9″). They have a rustic appearance but are smoother than previous 38mm stock.
The 36mm tanalised boards provide a useful decking board where customers want a more ‘rustic’ appearance. The boards are often utilised as ridge boards in pitched roof constructions, they can also be used for cladding the sides of a larger timber shed where any movement in the board width can be tolerated.
These timbers are tanalised for situations where the timber may be subjected to the risk of wetting from rain, but they are not intended for use in ground contact. If however the boards are used in ground contact such as a raised vegetable or flower bed then make sure that water can drain away from the bottom of the raised bed, this will help to increase the board’s service life. As with all tanalised timber the service life of the board can be increased by the application of a water stain or repellent such as Osmo Natural Woodstain.
Timbers all pressure treated with preservative
These timbers are all pressure treated with Tanalith E, or similar, timber preservative. It is vital that any cross cuts are treated with two coats of Ensele end-grain preservative treatment.
UK grown Timber 36mm stocks
Normally 1-2 packs, around 200 quantity, of each section size are kept in stock.
Phone to order
Lines open 7:30 - 17:00 Mon - Fri