Profile 3 Fibre Cement

  • UK manufactured product
  • Highly cost effective weather proofing
  • Low maintenance profiled roofing
  • Does not rust, rot or corrode
  • Resistant to chemical attack
  • Excellent noise and thermal insulation

Product Details

Profile 3 is a fibre cement corrugated roof sheet that provides strength with durability of the product.  This roofing is designed for roofs of 5° pitch and over and is popular for small structures in the agricultural, industrial and domestic sectors such as housing, garages, general purpose sheds and smaller buildings.  The sheets are 782mm wide with a cover of 650mm, while quite heavy they are relatively easy to handle.  A 10 foot (3.05 metres) sheet weighs approximately 35 kg.

Marley Eternit profiled 6 sheeting is manufactured from Portland cement and water, reinforced with natural and synthetic fibres to produce a fibre cement roofing product that has a life expectancy of at least 50 years.We stock the natural grey sheets.


The semi compressed fibre cement sheets can absorb up to 25% of their dry weight in moisture, helping to minimise the risk of condensation dripping from the roof, a definite advantage for agricultural buildings

The product is also low maintenance, fibre cement profiled sheeting has good resistance to aggressive atmospheric conditions, making it resilient to corrosion and also long-lasting against the elements.

Profile 3 fibre cement sheets have a more stable internal temperature than steel roof sheeting and also insulates against the noise caused by wind and rain

A range of accessories is available.


A detailed pdf can be downloaded from this page.  Considerations include two 2 fasteners per fibre cement sheet per purlin. Holes through the sheet must be drilled, never punched, and be 2 mm larger than the fastener diameter.  We sell a 6.5 x 90mm fasteners for timber which will drill through the Profile 3 sheet, open up the oversize hole and drill into the timber purloin. They also have an integral sealing washer.

Traditional fasteners, such as M6 x 80mm drive screws for timber, can be used but only in conjunction with sealing washers and caps.  Whichever fastener is selected they should be positioned on the first full corrugation to the side of the side lap. At end laps, the fasteners should be 50mm from the top end of the lap.

Phone to order

01803 813 803

Lines open 7:30 - 17:00 Mon - Fri

Delivery details

Usually within 1-2 working days

We offer next day delivery, when required, for our normal delivery days (Monday to Friday) and areas. Customers are requested to phone in before 12.00pm on the day prior to delivery with their complete product listing, delivery address and payment details.