Bullnose Boards
Bullnose composite decking board
One of the benefits of composite decking is the possibility of boards with rounded edges without the risk of splinters. Millboard devised their Millboard decking range system to remove some of the shortfalls of traditional wooden decking – splinters, exposed screw fixings and algae to name just a few.
One improvement was the introduction of a moulded bullnose board of 150mm to produce a more professional finish on deck stairs and edging.
Millboard colours and Bullnose dimensions
Millboard have an eye for detail. Their Bullnose boards produce a sleek, contemporary finish to the main deck borders and any steps leading off the deck/main deck. The bullnose boards are 32mm thick by 2200mm long to match the deck boards in the Enhanced Grain, Weathered and Lastane ranges.
All current Millboard colours are available Antique Oak, Brushed Basalt, Burnt Cedar, Coppered Oak, Driftwood, Embered, Jarah, Limed Oak, Golden Oak, Smoked Oak and Vintage. Please note that the boards for Driftwood & Smoked Oak use the same colour boards and similarly sharing for both Embered and Burnt Cedar boards.
Millboard Touch-Up coating is also available for sealing any cross-cut boards.
A professional finish
Attention to detail and Millboard quality products lead to a professional finish. Millboard’s short YouTube presentation illustrates an install on bullnose boards for steps and decking borders. Millboard’s Bullnose composite decking boards are featured, including the best way to mitre the boards for a neat finish.
- Millboard Bullnose Board - Brushed Basalt - 32 x 150mm x 3.6m
D_MILL_EDGE_MEBB360B
- Millboard Bullnose Board - Burnt Cedar - 32 x 150mm x 3.6m
D_MILL_EDGE_MEBB360R
- Millboard Bullnose Board - Coppered Oak -32 x 150mm x 3.6m
D_MILL_EDGE_MEBB360C
- Millboard Bullnose Board - Golden Oak - 32 x 150mm x 3.6m
D_MILL_EDGE_MEBB360G
- Millboard Bullnose Board - Limed Oak - 32 x 150mm x 3.6m
D_MILL_EDGE_MEBB360L
- Millboard Bullnose Board - Smoked Oak - 32 x 150mm x 3.6m
D_MILL_EDGE_MEBB360D
- Millboard Bullnose Board - Vintage Oak - 32 x 150mm x 3.6m
D_MILL_EDGE_MEBB360V
- Newtechwood Ultrashield Naturale Solid Bullnose Stair Edge - Antique - 23 x 138mm x 3.6m
D_NTW_NAT_US33_ANT_3.6
- Newtechwood Ultrashield Naturale Solid Bullnose Stair Edge - Light Grey - 23 x 138mm x 3.6m
D_NTW_NAT_US33_LGR_3.6
- Newtechwood Ultrashield Naturale Solid Bullnose Stair Edge - Teak - 23 x 138mm x 3.6m
D_NTW_NAT_US33_TEA_3.6