Product Details
HardiePlank VL Starter Profile
HardiePlank VL Starter profile provides lower edge support for horizontal plank applications. This is for horizontal applications only and the starter profile must be installed absolutely level and flat.
Firstly it is recommended to fit the ventilation profile. This should be fitted so that the unperforated leg sits behind the batten. This will prevent build up to the front face of the batten once the starter profile is installed.
2-Part VL Corner Profile
There are two options for the external corners, firstly the HardiePanel External metal corner (not normally stocked) or the 2-Part VL Corner profile. This is a neat fitting where the first part of the fitting is screwed to the batten. Then the outer part of trim is attached to cover any visible fixings. Available in six colours to co-ordinate with the HardiePlank VL Colours
Phone to order
Lines open 7:30 - 17:00 Mon - Fri