Timber
Construction and C24 Structural Timber
Tanalised C24 structural timber remains the popular choice for building projects. Timber combines a high strength-to-weight ratio and is relatively easy to cut and fix.
Our structural timbers are used in house builds, extensions and loft conversions where regularised, and pressure treated timbers are required. Situated between Exeter, Plymouth and Torquay we supply Scandinavian C24 structurally graded timber to large areas of Devon and Cornwall. Section sizes include ex.50mm and ex.75mm timber with most graded timbers up to 6.0 metres long.
Sawn Timber and Battens
Battens are stocked at 19mm x 38mm, 25mm x 50mm and 38mm x 50m. Coloured BS 5534 graded battens are stocked, the colours are applied by most Nordic and Baltic mills to indicate the battens have achieved this grade. It is important when installing that the roofer checks that the BS 5534 stamp has been applied to every batten.
All of our 22mm and 38mm sawn timbers are pressure treated with Tanalith or similar timber preservative. These sawn treated timbers are intended for use above ground level. We keep large stocks of 25mm and 38mm Sawn timbers, they are mainly used for cladding or fencing applications and therefore require no grading.
Our sawn timber is unspecified softwood, usually Sitka spruce with some larch and douglas-fir. Boards will ultimately fade to grey but if you prefer you can stain timber boards earlier in their service life.
Demand is still high for sawn timber such as “Yorkshire Boarding” for use in agricultural buildings. Therefore, large stocks of 150mm width sawn timber are maintained.
Joinery Timbers from stock
Our joinery timber is sourced from selected specialised importers, all of our redwood joinery is sawn, and kiln dried before being imported.
If you have any timber requirements not covered here then please contact us.
- 25x50 (19 x 44) PSE Untreated
PARU_025X050_SCA_TALL
- 25x75 (19 x 69) PSE Untreated
PARU_025X075_SCA_TALL
- 32 x 200mm PSE Tanalised
PART_032X200_TALL_SVW
- 32 x 225mm Sawn Unsorted Redwood Joinery (PEFC Certified), per metre
J_RED_32X225_TALL
- 32x115 (27 x110) PSE Untreated
PARU_032X115_SCA_TALL
- 32x150 (27 x144) PSE Untreated
PARU_032X150W_SCA_TALL
- 32x225 (27 x219) PSE Untreated
PARU_032X225_SCA_TALL
- 36 x 225mm Scaffold Boards (PEFC) 3.9 metres
CA03_38X225_3.9P
- 38 x 225mm Sawn Pressure Treated, 4.8m
CA02_38X225_4.8_BSW
- 38 x 225mm Sawn Unsorted Redwood Joinery (PEFC), per metre
J_RED_38X225_TALL
- 38 x 50mm KD 4RC Treated 4.8m
CK_047x038_4.8
- 38 x 88mm Sawn Pressure Treated Rail
FE_RAILS_38_TALL_BSW