1.8m x 1.8m (6ft x 6ft) Omega Lattice Top Panel (FSC Mix) (OLT180)

Details

The Omega lattice top panels are avaialable in 4 different sizes. Heights vary from 6ft. by 3ft. high through to the largest of 6ft. wide by 6ft. high

This decorative panel range has been our top-selling option since 2010. The Omega lattice top panels are very decorative but they are also durable combining a sturdy design specification, quality materials and pressure treated timbers.

Panel Design and Manufacture

Horizontal slats are machined to a smooth finish and then arranged either side of the vertical battens. This design produces a sturdy privacy panel which helps to reduce wind load by allowing some air to pass through the structure. These quality fence panels are finished with a channelled frame (Double groove Repair Kit Framing, (RK-DGF) around all the panel and lattice edges. We stock a selection of repair timbers should the customer need to repair, or customise, some of the panels.

Panel Size Options

All of these fencing panels are pressure treated with a light green preservative which mellows in colour when exposed to daylight. The panels can be supported with either 75mm (3”) or 100mm (4”) posts when installing. We carry sawn, planed and 15 year warranty post options in stock along with quick-setting Postcrete. Other associated products include 46mm Panel Clips, Gates, Stainless Steel Screws, Osmo Natural Woodstains and Planed Gravel Boards.

1.8m wide x 0.9m high (6ft x 3ft) Omega Lattice Top Panel (FSC Mix) (OLT90)

1.8m wide x 1.2m high (6ft x 4ft) Omega Lattice Top Panel (FSC Mix) (OLT120)

1.8m wide x 1.5m high (6ft x 5ft) Omega Lattice Top Panel (FSC Mix) (OLT150)

1.8m wide x 1.8m high (6ft x 6ft) Omega Lattice Top Panel (FSC Mix) (OLT180)

Panel Heights, a little note

The four panel sizes, 900mm, 1200mm, 1500mm and 1800mm refer to the approximate vertical height at the centre of each panel. Because of the gentle curvature of the panel design the height at the panel edges is slightly lower. So a 900mm height panel has a “shoulder” height of approximately 700mm, the 1200mm has a shoulder height of 1000mm – if you allow for a difference of 200mm between panel centre and panel shoulders then you should be pretty much there. Finally, all sizes are approximate, but these panels do have a range of slats and battens available for separate purchase.

Panel availability and distribution

Due to transport costs our Omega Panels are currently only available for Devon and Cornwall delivery. If you like these panels then you could view the Grosvenor Panels. The Grosvenor Panels/Screens enjoy free delivery to most of the UK Mainland. This is subject to a minimum order of 3 Rowlinson panels/screen/gates

More Information