James Hardie Plank Metal Trim Internal Corner 3.0m Soft Green
Product Code:
HARDIE_TRIM_INT_JHSOF
Hardie Trim Internal Corner 3.0m Soft Green
James Hardie MetalTrims have a clean modern look. These Metal Trims are manufactured as internal (and external) corners using high-quality coated aluminium. Hardie® Plank Internal corners can be used on either the Hardie Plank system, or in conjunction with Hardie VL planks.
Installing JamesHardie Internal Corners
Many questions can be answered by the JamesHardie install video When installing Hardie products care should be taken to follow the James Hardie published Installation manual. The Hardie trims should be secured with stainless steel nails, the nail heads should be flush. It is important that the nails are not over-driven or under-driven.
When these metal trims are butt joined together care must be taken to align them correctly before fixing. This is because in cases of extreme heat there is the possibility of thermal expansion. For best results when fixing the trim, fix at the top first, then the base and then finally at remaining locations. The maximum recommended spacing for these fixings is 1.5 metres.
When installation is completed the protective plastic film cover should be removed immediately. If the cover is left in-situ it may become trapped behind the cladding and make it difficult to remove. In the event of any chipped metal trims during fixing then use the corresponding James Hardie Edge Colour to rectify.
Warranty details
Hardie cladding products with ColourPlus technology come with a 15 Year Warranty however the HardieSeal Edge Coating must be used where required on the HardieBoard in order for any potential Warranty claims. For more details see 15 Year Warranty
| Colour | Green |
|---|---|
| Brand | James Hardie |
| Material | Metal |
| Lead time | 1-2 Days |
Write Your Own Review
