Premier HD Tanalised Lap

  • Four standard panel sizes
  • Standard stocked product
  • Made with UK grown slats
  • Straight edged lap slats
  • Pressure treated for longevity
  • Can use panel clips to fix to posts

Product Details

Tanalised Lap Fence Panels

Firstly these lap fence panels are made in England by a specialist timber panel, gate and timber machinists who have been trading since the 1940’s.  They are made to a high specification, with pressure treated components and the products are competitively priced.  When comparing the price of these panels you must consider the quality, we have looked at supplying lower price panels but the quality loss is too great.

Traditional Lap Panels

Our HD overlap panels use a traditional design which combines horizontal lapped 4-5mm thick slats with vertical battening – there are five 18mm x 38mm battens on one side, three on the other.  (please note this includes the battens that are fixed on the panel edges)  This helps to minimise flex and increase the panel’s strength by holding the overlap slats in place. These components are cut as a separate stage of the panel making process; the timber is supplied by other UK businesses. The timber fence slats are topped with sloped capping to minimise water ingress and to provide an attractive finish to the top of the panels.

Straight edged slats

Finally our panels traditionally used ‘waney’ edge slats. However since early 2015 our panel slats have been machined with straight trimmed edges . This produces a more uniform looking fence panel. The panels are pressure treated with a light green preservative which mellows in colour when exposed to daylight.

Because of the high cost there are no half-panels available kept in stock. Most Trade customers place batten down both sides of the panel at the desired size and cut the panel down. We do stock a range of  gates that complement the fence panels. These panels can be teamed with either standard sawn posts or 15 Year warranty permaposts

a. Panel sizes available from stock 1.83 metre wide x 0.91 metre high (6’ wide x 3’ high)b.
b. Panel sizes available from stock 1.83 metre wide x 1.22 metre high (6’ wide x 4’high)
c. Panel sizes available from stock 1.83 metre wide x 1.52 metre high (6’ wide x 5’ high)
d. Panel sizes available from stock 1.83 metre wide x 1.83 metre high (6’ wide x 6’ high)

Finally, other panel sizes can be made to order. However, these must normally be in minimum batch size of 30 units because of the setting up time and costs for the machines.

Phone to order

01803 813 803

Lines open 7:30 - 17:00 Mon - Fri

Delivery details

Usually within 1-3 working days

At Southern Timber we offer a kerbside delivery through the Torbay, Teignbridge, Exeter, South Hams and Plymouth areas. While most deliveries are free sometimes they may be chargeable depending on location and the total value of the order.

We offer next day delivery, when required, for our normal delivery days (Monday to Friday) and areas. Customers are requested to phone in before 12.00pm on the day prior to delivery with their complete product listing, delivery address and payment details.