Liberon Wood reviver
Preparation
Ensure the floor is clean, dry and dust free.
Application
Shake well before use. Apply a thin coat of Wood Floor Reviver evenly to the surface using a sponge, mop or floor cloth and allow to dry for a minimum of 1 hour. On heavy traffic areas or badly worn surfaces, apply a second coat once the first coat has dried thoroughly.
Advice
- Wash and dry floor.
- Re-apply Wood Floor Reviver as required when the surface looks dull and tired.
- Remove as much of the product as possible from the tools after use. Do not dispose of residues and washing water/solvents in the sink, toilet, sewer, bin, etc., in order to avoid discharge into the environment.
| Lead time | days |
|---|
Write Your Own Review
