24mm Softwood Structural Ply 2440x1220mm
Product Code:
ST_SHU_PLY_25
24mm Structural Ply (EN314-2 Class 3 (WBP) EN636-2, CE2+) (FSC Mix), 2440x1220mm
WISA-Spruce is a strong, rigid and light in weight plywood panel. It is popular for structural uses and load-bearing applications, Construction, Offsite construction, Multipurpose panel and Vehicle Flooring, Panel Trading
Wisa sheets are used in roofing, basic construction panels, flooring constructions, Furniture, Joinery and shop fittings and walling constructions
WISA-Spruce is a strong, rigid and light in weight plywood panel for structural uses and load-bearing applications. The panel is manufactured from certified Nordic Spruce. Spruce veneers are glued together in cross-banded construction. The product is light yet strong and is suitable for applications such as roofing, flooring, wall sheathing, packaging and joinery. The panels can be painted or machined without losing the superior characteristics of the original spruce panel.
Bonding properties of Spruce Ply
Weather resistant gluing according to EN 314-2/class 3 Exterior. Gluing fulfils the requirements of EN 13986 E1 low formaldehyde emission class.
Bonding class EN 314-2, class 3 Exterior
Weather resistant glueing according to EN 314-2/class 3 Exterior. WISA-Spruce fulfils the requirements of EN 13986 E1 low formaldehyde emission class.
Sawing, sanding or machining of plywood
Further processing can generate wood dust. Potential risks and instructions for safe use and handing are mostly related to formation of dust. An explosion hazard may occur if a dust cloud comes into contact with an ignition source. Check exposure limits and other regulations for dust given by local authorities. For more detailed instructions please see product related plywood safety profile on wisaplywood.com.
Strictest emission regulations are met, however, as all natural materials also plywood may release small quantities of formaldehyde in gaseous form.
Lifecycle
At the end of lifecycle, product can be burned as a carbon neutral source of energy. Follow always the local requirements and best practices to protect environment, nature and life on earth
Biological durability use class 2 according to EN 13986, 2004 + A1: 2015.
For square edge of panel please leave an installation gap of 1-2 mm per panel during installation as the panels can have dimensional changes due to changes in air humidity. Panels shall be loose laid for at least 24 hours before fixing to acclimatize wood into surrounding conditions.
Wood being a living material, every panel is unique. Thus, a photograph or a sample piece cannot represent all the panels, as regards colours, shades, graining, knots etc.
| Lead time | days |
|---|
Write Your Own Review
