Dave Stevenson

Composite Deck Hollow is one of our composite decking offerings. Composite decking has its own place in the decking market.   Sometimes softwood and hardwood deckboards are not suitable for some installations, maybe the boards are not durable enough or maybe there are stringent budget constraints.  You might have used softwood decking before and found that your garden was too damp an environment, the boards became slippery and didn’t last as long as anticipated.   While we have 15 Year Warranty Softwood, durable Hardwood and Millboard decking as options you might also want to consider our composite decking.

Composite Deckboard durable and environmentally friendly

These composite deckboards are made primarily from a mix  of approximately 60% recycled hardwood fibres and 40% recycled polyethylene. These raw materials are mixed with a bonding agent, colour tint and other additives. An anti-UV agent is added during manufacture a

Composite Deck Maintenance

When the deck is finally installed remember to keep that decking looking good will need a little bit of maintenance. These composite deckboards are hard wearing and the composite materials used mean the boards should not rot, splinter or warp like traditional timber boards might.  Because these composite deckboards are made primarily from recycled hardwood fibres there will inevitably be some fading of colour over time. This will be more pronounced in areas exposed to prolonged direct sunlight.

To keep your investment looking good you will need a broom, hot soapy water and a wash down with clean water.

Keeping it clean

As a general rule prevention is better than cure. Best practice on all decking materials is very similar. The following list of “do-nots” is not fully exhaustive.

• Furniture and plant pots should be lifted, not dragged across the decking
• Care should be tak

When considering composite decking you will need some Composite Deck Accessories.  You will need to verify how it is going to be installed, or ask us for advice, before you place your order. While the composite installation is similar to that of softwood or hardwood decks there are a few steps unique to composite products.  Due to this reason a number of specialist trims and accessories have been developed to make installs quicker and neater to the eye.

Composite Deck Accessories

Composite deckboards are made primarily from a mix of approximately 60% recycled hardwood fibres and 40% recycled polyethylene. These raw materials are mixed with a bonding agent, colour tint and other additives. An anti-UV agent is added during manufacture and this helps the boards to resist colour fading. However, there will be some fading of colour over time, but this should not detract too much, more of a weathering look that occurs in areas exposed to

Composite Deck Design

Your composite deck design will have to take several factors into account to make the deck function the way you want it to.  As always there will be some compromises.  If your deck sits more than 300mm above ground level you should seek advice from your local planning department regarding possible planning requirements.

Decking location

The location of your composite deck is most important, usually they are positioned as a transition area from indoors to outdoors. If this is the case then the colour of the deck will probably be significant.  While talking of colour please be aware that because this is a wood composite board there will be some mild colour fading of the boards. The sub-frame for the decking will have to be considered especially in areas such as stairs and access to indoors. The sub-frame structure options include composite joists, carcassing timber and Plaswood.

Because