Workshop 9' x 12', Rowlinsons

12mm Shiplap cladding
Double doors for easy access
12mm Tongue and groove floor
Lock and key to secure double doors
Solid board roof
8 Styrene glazed side windows
2 front Styrene glazed windows
High eaves for extra headroom
Uses 29 x 35mm & 29 x 45mm framing
Dipped honey-brown finish
Mineral roofing felt

Rowlinson Timber Workshop 9×12

This Rowlinson Workshop 9’ x 12’ is one of five workshops from Rowlinson Garden Products. These modular workshops vary in size, providing storage and work space and all should enjoy considerable natural light through their generous provision of windows. You might also consider the Workshop 9’ x 15’

Buildings Construction

Firstly the wall sections are clad with a 12mm finished shiplap cladding. Constructed with a solid boarded roof, the workshop floor is made of tongue and groove (TGV) boards. The double doors are secured with a lock and key (included) and both doors are fitted with three hinges each.

These are sectional buildings, the buildings use 29mm x 35mm and 29mm x 45mm framing which become more rigid when the sections are secured to one another. The building is supplied with mineral felt for the apex pitched roof. The workshops feature higher eaves than the larger Rowlinson sheds – this is to provide extra headroom. Finally, this workshop features eight Styrene glazed side windows and two front windows.

It is important (as with all timber buildings) that the shed is installed on pressure treated bearers to ensure the timbers are not in ground contact. More details are in the enclosed assembly instructions.
Finally please note this 9 x 12 Workshop is supplied with a dipped finish, and the timbers must be further protected by applying a quality wood preservative such as Osmo, Sadolin or Ronseal wood stains.

9 x 12 Workshops Dimensions

External Height: 2350mm, Width: 2880mm, Depth: 3790mm
Internal Height Max: 2210mm, Internal Height Min:1800mm
Internal Width: 2700mm, Depth: 3670mm
Door Opening Height: 1723mm, Width 1628mm
Footprint Width: 2700mm; Depth: 3670mm
Ideal base width: 2750mm; Depth: 3720mm

Delivery and Workshop Installation

All Rowlinsons garden buildings are delivered to kerbside and in flat pack format for customer assembly. Therefore each product is supplied with detailed Assembly Instructions. They can also be downloadable from this page in PDF format.

Adequate provision must be made to avoid ground contact and ensure air can circulate underneath the building. Placing the building on a concrete pad or slab base is acceptable provided that the building is not allowed to sit in pooled water during wet conditions. Because the building must not sit on soil or grass it MUST be erected on UC4 pressure treated wooden 50mm x 50mm or similar bearers (These are not supplied in the kit). Rowlinson Garden Products recommend using pressure treated bearers with all buildings on any type of base

Stock Availability

All Rowlinson’s Garden Products are supplied direct from their Cheshire Warehouse. Therefore no Worksops are available for collection from our Devon premises.
While most parts of Mainland UK are eligible for free delivery a few remote areas will have to pay a delivery surcharge. Please see Delivery details for Post Codes affected.

More Information