Workshop 9' x 9', Rowlinsons

12mm Shiplap cladding
Double doors plus lock and key
Tongue and groove floor
Solid board roof
6 fixed Styrene glazed side windows
2 front fixed Styrene glazed windows
High eaves for extra headroom
Uses 29 x 35mm & 29x 45mm framing
Dipped honey-brown finish
Mineral roofing felt

Rowlinsons Workshop 9 x 9

This Rowlinsons Workshop 9 x 9 is one of five workshops from Rowlinson Garden Products. These modular workshops vary in size, providing storage and work space and all should enjoy considerable natural light through their generous provision of windows. You might also be interested in the Workshop 9 x 12

Buildings Construction

Firstly the wall sections are clad with a 12mm finished shiplap cladding. Constructed with a solid boarded roof, the workshop floor is made of tongue and groove (TGV) boards. The double doors are secured with a lock and key (included) and both doors are fitted with three hinges each.

These are sectional buildings, the buildings use 29mm x 35mm and 29mm x 45mm framing which become more rigid when the sections are secured to one another. The building is supplied with mineral felt for the apex pitched roof. The workshops feature higher eaves than the larger Rowlinson sheds – this is to provide extra headroom. Finally, this workshop features six styrene glazed side windows and two front windows.

It is important (as with all timber buildings) that the shed is installed on pressure treated bearers to ensure the timbers are not in ground contact. More details are in the enclosed assembly instructions.

Finally please note this 9 x 9 Workshop is supplied with a dipped finish, and therefore the timbers must be further protected by applying a quality wood preservative such as Osmo, Sadolin or Ronseal wood stains.

Rowlinsons Workshop 9 x 9 Dimensions

External Height: 2350mm, Width: 2880mm, Depth: 2890mm

Internal Height Max: 2210mm, Internal Height Min:1800mm

Internal Width: 2700mm, Depth: 2770mm

Door Opening Height: 1723mm, Width 1628mm

Footprint Width: 2700mm; Depth: 2770mm

Ideal base width: 2750mm; Depth: 2820mm

Delivery and Workshop Installation

All Rowlinsons garden buildings are delivered to kerbside and in flat pack format for customer assembly. Consequently each product is supplied with detailed Assembly Instructions. They can also be downloadable from this page in PDF format.

Adequate provision must be made to avoid ground contact and ensure air can circulate underneath the building. Placing the building on a concrete pad or slab base is acceptable provided that the building is not allowed to sit in pooled water during wet conditions. Because the building must not be positioned on soil or grass it MUST be erected on UC4 pressure treated wooden 50mm x 50mm or similar bearers (These are not supplied in the kit). Rowlinson Garden Products recommend using pressure treated bearers with all buildings on any type of base

Stock Availability

All Rowlinson’s Garden Products are supplied direct from their Cheshire Warehouse. Therefore no Workshops are available for collection from our Devon premises.

While most parts of Mainland UK are eligible for free delivery a few remote areas will have to pay a delivery surcharge. Please see Delivery details for Post Codes affected.

More Information